RTL Problems / Level 2 · Combinational Design
What You Will Learn
By solving BCD Incrementer, you will acquire core industry skills:
- Synthesizable hardware modeling in standard Verilog-2001 / SystemVerilog.
- Correct handling of interface port contracts, edge-triggered clocks, and active-low/high resets.
- Simulation waveform interpretation and debugging using timing diagrams (VCD traces).
- Architectural avoidance of timing violations, glitching hazards, and synthesis warnings.
Problem Statement & Requirements
Add one to a BCD digit, wrapping 9 back to 0 with a carry — the combinational building block behind every BCD counter on this site.
Hardware design teams at leading semiconductor firms evaluate these exact port contracts, race-condition assertions, and corner cases during technical design reviews and ASIC engineer interviews.
carry_out set, not roll into the invalid binary value 10 (4'b1010). The fix is a single special case: carry_out = (bcd_in==9); bcd_out = carry_out ? 0 : bcd_in+1;. Forgetting the wrap (just computing bcd_in+1 unconditionally) still gets carry_out right — the digit itself briefly becomes an invalid BCD code the moment it should have reset.Port List & Interface Timing
The hidden testbench instantiates top_module. Module port names and bit-widths must match the interface contract exactly:
| Name | Dir | Width | Description |
|---|---|---|---|
| bcd_in | input | 4 | BCD digit, 0-9 |
| bcd_out | output | 4 | bcd_in + 1, wrapped to 0 at 9 |
| carry_out | output | 1 | 1 when bcd_in was 9 (wrapped) |
Timing Constraints & Synthesizable RTL Rules
Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.
Synthesis Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.
Starter RTL Code
module top_module(
input [3:0] bcd_in,
output [3:0] bcd_out,
output carry_out
);
// Your code here — carry_out = (bcd_in==9); bcd_out = carry_out ? 0 : bcd_in+1.
endmodule
Related RTL Problems in Level 2
- D Flip-Flop — Positive-Edge-Triggered Storage — Implement a basic 1-bit positive-edge-triggered D flip-flop without reset.
- D Flip-Flop with Asynchronous Reset — Reset Behavior — Design a D flip-flop with active-low asynchronous reset (areset_n). Reset forces q to 0 immediately, independent of clk.
- D Flip-Flop with Synchronous Reset — Clocked Reset — Implement a D flip-flop with active-high synchronous reset (sync_rst). The reset takes effect only on the rising clock edge.
Connected EcrioniX Learning Resources
Accelerate your VLSI engineering knowledge with these curated learning materials:
Progress through step-by-step verified modules from fundamentals to advanced silicon design.
Benchmark your hardware knowledge across 10 semiconductor domains and receive study roadmaps.
Explore foundational circuit theory, waveform timing, and physical hardware implementation.
Frequently Asked Questions
What does BCD Incrementer require?
Add one to a BCD digit, wrapping 9 back to 0 with a carry — the combinational building block behind every BCD counter on this site. Implement it as Verilog module top_module matching the listed ports.
Is this design combinational or sequential?
Tags: combinational, arithmetic. If a clock signal is present in the port table, implement it as sequential logic; otherwise, use continuous assignments or combinational blocks.
How is my solution graded?
A hidden SystemVerilog testbench simulates your module in the cloud judge. You pass when all directed corner cases match the golden model and the VCD timing waveform matches the contract.
How does this challenge help with semiconductor interviews?
Technical interviewers at NVIDIA, Qualcomm, Apple, and Intel routinely ask candidates to code, debug, and explain the timing waveforms of BCD Incrementer to assess real-world synthesizability and race-condition awareness.