RTL Problems / Level 2 · Combinational Design
What You Will Learn
By solving BCD to Excess-3 Converter, you will acquire core industry skills:
- Synthesizable hardware modeling in standard Verilog-2001 / SystemVerilog.
- Correct handling of interface port contracts, edge-triggered clocks, and active-low/high resets.
- Simulation waveform interpretation and debugging using timing diagrams (VCD traces).
- Architectural avoidance of timing violations, glitching hazards, and synthesis warnings.
Problem Statement & Requirements
Convert a BCD digit (0-9) into Excess-3 code, a self-complementing code once used in early decimal computers.
Hardware design teams at leading semiconductor firms evaluate these exact port contracts, race-condition assertions, and corner cases during technical design reviews and ASIC engineer interviews.
excess3 = bcd + 3. That is the entire circuit: one 4-bit adder with a constant operand.Port List & Interface Timing
The hidden testbench instantiates top_module. Module port names and bit-widths must match the interface contract exactly:
| Name | Dir | Width | Description |
|---|---|---|---|
| bcd | input | 4 | BCD digit, 0-9 |
| excess3 | output | 4 | bcd + 3 |
Timing Constraints & Synthesizable RTL Rules
Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.
Synthesis Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.
Starter RTL Code
module top_module(
input [3:0] bcd,
output [3:0] excess3
);
// Your code here
endmodule
Related RTL Problems in Level 2
- D Flip-Flop — Positive-Edge-Triggered Storage — Implement a basic 1-bit positive-edge-triggered D flip-flop without reset.
- D Flip-Flop with Asynchronous Reset — Reset Behavior — Design a D flip-flop with active-low asynchronous reset (areset_n). Reset forces q to 0 immediately, independent of clk.
- D Flip-Flop with Synchronous Reset — Clocked Reset — Implement a D flip-flop with active-high synchronous reset (sync_rst). The reset takes effect only on the rising clock edge.
Connected EcrioniX Learning Resources
Accelerate your VLSI engineering knowledge with these curated learning materials:
Progress through step-by-step verified modules from fundamentals to advanced silicon design.
Benchmark your hardware knowledge across 10 semiconductor domains and receive study roadmaps.
Explore foundational circuit theory, waveform timing, and physical hardware implementation.
Frequently Asked Questions
What does BCD to Excess-3 Converter require?
Convert a BCD digit (0-9) into Excess-3 code, a self-complementing code once used in early decimal computers. Implement it as Verilog module top_module matching the listed ports.
Is this design combinational or sequential?
Tags: combinational, code-converter. If a clock signal is present in the port table, implement it as sequential logic; otherwise, use continuous assignments or combinational blocks.
How is my solution graded?
A hidden SystemVerilog testbench simulates your module in the cloud judge. You pass when all directed corner cases match the golden model and the VCD timing waveform matches the contract.
How does this challenge help with semiconductor interviews?
Technical interviewers at NVIDIA, Qualcomm, Apple, and Intel routinely ask candidates to code, debug, and explain the timing waveforms of BCD to Excess-3 Converter to assess real-world synthesizability and race-condition awareness.