Part of Curriculum: Verilog Fundamentals (Module 1: Combinational Design)
View Full Roadmap →
Level 2 Easy 10 pts ✓ Solved

1-Bit Full Subtractor

Combinational Design · combinational, subtractor

Subtract b and a borrow-in from a, producing a difference bit and a borrow-out — the subtraction twin of the full adder.

Write a synthesizable Verilog module named top_module matching the ports below exactly.
📐 Circuit Schematic Diagram
abbindiffboutADD/SUBDATAPATH
⚡ Timing & Synthesizability Constraints

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

RTL Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Concept: diff = a ^ b ^ bin (same XOR pattern as addition — subtraction and addition share the same bit-difference logic). The borrow-out is 1 whenever a is too small to cover b and bin: bout = (~a & b) | (~a & bin) | (b & bin).
NameDirWidthDescription
ainput1Minuend bit
binput1Subtrahend bit
bininput1Borrow in
diffoutput1a − b − bin, low bit
boutoutput1Borrow out
Expected Waveform (Golden Timing Contract)
Verilog-2001 / SV Saved
Font: |
// Click Run Tests (or press Ctrl+Enter) to compile your RTL and simulate against hidden testbenches.
Simulation Timing Diagram (VCD Waveform)
100%
No simulation waveform yet. Run tests to simulate and generate VCD traces.
No compilation run yet. Syntax warnings and elaboration messages will appear here.
No simulation output yet. Raw stdout from vvp will appear here.

RTL Problems / Level 2 · Combinational Design

What You Will Learn

By solving 1-Bit Full Subtractor, you will acquire core industry skills:

  • Synthesizable hardware modeling in standard Verilog-2001 / SystemVerilog.
  • Correct handling of interface port contracts, edge-triggered clocks, and active-low/high resets.
  • Simulation waveform interpretation and debugging using timing diagrams (VCD traces).
  • Architectural avoidance of timing violations, glitching hazards, and synthesis warnings.

Problem Statement & Requirements

Subtract b and a borrow-in from a, producing a difference bit and a borrow-out — the subtraction twin of the full adder.

Hardware design teams at leading semiconductor firms evaluate these exact port contracts, race-condition assertions, and corner cases during technical design reviews and ASIC engineer interviews.

Concept: diff = a ^ b ^ bin (same XOR pattern as addition — subtraction and addition share the same bit-difference logic). The borrow-out is 1 whenever a is too small to cover b and bin: bout = (~a & b) | (~a & bin) | (b & bin).

Port List & Interface Timing

The hidden testbench instantiates top_module. Module port names and bit-widths must match the interface contract exactly:

NameDirWidthDescription
ainput1Minuend bit
binput1Subtrahend bit
bininput1Borrow in
diffoutput1a − b − bin, low bit
boutoutput1Borrow out

Timing Constraints & Synthesizable RTL Rules

⚡ Synthesizable Implementation Guidelines

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

Synthesis Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Starter RTL Code

module top_module(
  input  a,
  input  b,
  input  bin,
  output diff,
  output bout
);

  // Your code here

endmodule
Advertisement

Related RTL Problems in Level 2

Frequently Asked Questions

What does 1-Bit Full Subtractor require?

Subtract b and a borrow-in from a, producing a difference bit and a borrow-out — the subtraction twin of the full adder. Implement it as Verilog module top_module matching the listed ports.

Is this design combinational or sequential?

Tags: combinational, subtractor. If a clock signal is present in the port table, implement it as sequential logic; otherwise, use continuous assignments or combinational blocks.

How is my solution graded?

A hidden SystemVerilog testbench simulates your module in the cloud judge. You pass when all directed corner cases match the golden model and the VCD timing waveform matches the contract.

How does this challenge help with semiconductor interviews?

Technical interviewers at NVIDIA, Qualcomm, Apple, and Intel routinely ask candidates to code, debug, and explain the timing waveforms of 1-Bit Full Subtractor to assess real-world synthesizability and race-condition awareness.

Advertisement