Part of Curriculum: Protocol RTL Design (Module 1: Sequential Design)
View Full Roadmap →
Level 6 Medium 25 pts ✓ Solved

Packet Length Counter

Sequential Design · sequential, protocol

Count how many cycles a frame stayed active and latch that length the moment the frame ends — resetting cleanly so the next frame's length isn't polluted by the last one.

Write a synthesizable Verilog module named top_module matching the ports below exactly.
📐 Circuit Schematic Diagram
frame_activelength[7:0]>clkrst_nPACKET LENGTH COUNTESEQUENTIAL COUNTER
⚡ Timing & Synthesizability Constraints

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

RTL Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Concept: While frame_active is high, tally cycles in a running counter; the instant it drops, latch that tally into length and — critically — reset the running counter back to zero so the next frame starts clean. Forgetting the reset leaves the internal counter holding its old value, so the next frame's reported length silently includes cycles from the frame before it.
NameDirWidthDescription
clkinput1Clock
rstinput1Sync active-high reset (length=0)
frame_activeinput11 while a frame is being received
lengthoutput8Cycle count of the most recently completed frame
Expected Waveform (Golden Timing Contract)
Verilog-2001 / SV Saved
Font: |
// Click Run Tests (or press Ctrl+Enter) to compile your RTL and simulate against hidden testbenches.
Simulation Timing Diagram (VCD Waveform)
100%
No simulation waveform yet. Run tests to simulate and generate VCD traces.
No compilation run yet. Syntax warnings and elaboration messages will appear here.
No simulation output yet. Raw stdout from vvp will appear here.

RTL Problems / Level 6 · Sequential Design

What You Will Learn

By solving Packet Length Counter, you will acquire core industry skills:

  • Synthesizable hardware modeling in standard Verilog-2001 / SystemVerilog.
  • Correct handling of interface port contracts, edge-triggered clocks, and active-low/high resets.
  • Simulation waveform interpretation and debugging using timing diagrams (VCD traces).
  • Architectural avoidance of timing violations, glitching hazards, and synthesis warnings.

Problem Statement & Requirements

Count how many cycles a frame stayed active and latch that length the moment the frame ends — resetting cleanly so the next frame's length isn't polluted by the last one.

Hardware design teams at leading semiconductor firms evaluate these exact port contracts, race-condition assertions, and corner cases during technical design reviews and ASIC engineer interviews.

Concept: While frame_active is high, tally cycles in a running counter; the instant it drops, latch that tally into length and — critically — reset the running counter back to zero so the next frame starts clean. Forgetting the reset leaves the internal counter holding its old value, so the next frame's reported length silently includes cycles from the frame before it.

Port List & Interface Timing

The hidden testbench instantiates top_module. Module port names and bit-widths must match the interface contract exactly:

NameDirWidthDescription
clkinput1Clock
rstinput1Sync active-high reset (length=0)
frame_activeinput11 while a frame is being received
lengthoutput8Cycle count of the most recently completed frame

Timing Constraints & Synthesizable RTL Rules

⚡ Synthesizable Implementation Guidelines

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

Synthesis Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Starter RTL Code

module top_module(
  input  clk,
  input  rst,
  input  frame_active,
  output reg [7:0] length
);

  // Your code here — count cycles while frame_active is high; latch into length when it drops, then reset the counter.

endmodule
Advertisement

Related RTL Problems in Level 6

  • Manchester Encoder — Combine a data bit with the clock to produce a Manchester-encoded line signal — the self-clocking encoding used in classic Ethernet and RFID.
  • Manchester Decoder — Recover the original data bit from a Manchester-encoded line signal — the exact inverse of the Manchester Encoder problem.
  • Quadrature Rotary Encoder Decoder — Decode the two-phase A/B signal from a real rotary knob or mouse wheel into a direction and position count — sample B on every rising edge of A.

Frequently Asked Questions

What does Packet Length Counter require?

Count how many cycles a frame stayed active and latch that length the moment the frame ends — resetting cleanly so the next frame's length isn't polluted by the last one. Implement it as Verilog module top_module matching the listed ports.

Is this design combinational or sequential?

Tags: sequential, protocol. If a clock signal is present in the port table, implement it as sequential logic; otherwise, use continuous assignments or combinational blocks.

How is my solution graded?

A hidden SystemVerilog testbench simulates your module in the cloud judge. You pass when all directed corner cases match the golden model and the VCD timing waveform matches the contract.

How does this challenge help with semiconductor interviews?

Technical interviewers at NVIDIA, Qualcomm, Apple, and Intel routinely ask candidates to code, debug, and explain the timing waveforms of Packet Length Counter to assess real-world synthesizability and race-condition awareness.

Advertisement