Part of Curriculum: Memory and FIFO Design (Module 8: Gray Code Pointers & Conversion Mechanics)
View Full Roadmap →
Level 2 Medium 25 pts ✓ Solved

Gray to Binary Code Converter

Combinational Design · combinational, code-converter

Reverse the conversion: turn a 4-bit Gray code value back into standard binary.

Write a synthesizable Verilog module named top_module matching the ports below exactly.
📐 Circuit Schematic Diagram
gray[3:0]bin[3:0]GRAY TO BINARY CODE DIGITAL HARDWARE BLOCK
⚡ Timing & Synthesizability Constraints

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

RTL Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Concept: Unlike binary-to-Gray, this direction is a ripple of XORs, not a single expression: bin[3]=gray[3], then each lower bit is the XOR of the previous binary bit with the matching gray bit — bin[i] = bin[i+1] ^ gray[i], computed from the top bit down.
NameDirWidthDescription
grayinput4Gray-coded value
binoutput4Standard binary equivalent
Expected Waveform (Golden Timing Contract)
Verilog-2001 / SV Saved
Font: |
// Click Run Tests (or press Ctrl+Enter) to compile your RTL and simulate against hidden testbenches.
Simulation Timing Diagram (VCD Waveform)
100%
No simulation waveform yet. Run tests to simulate and generate VCD traces.
No compilation run yet. Syntax warnings and elaboration messages will appear here.
No simulation output yet. Raw stdout from vvp will appear here.

RTL Problems / Level 2 · Combinational Design

What You Will Learn

By solving Gray to Binary Code Converter, you will acquire core industry skills:

  • Synthesizable hardware modeling in standard Verilog-2001 / SystemVerilog.
  • Correct handling of interface port contracts, edge-triggered clocks, and active-low/high resets.
  • Simulation waveform interpretation and debugging using timing diagrams (VCD traces).
  • Architectural avoidance of timing violations, glitching hazards, and synthesis warnings.

Problem Statement & Requirements

Reverse the conversion: turn a 4-bit Gray code value back into standard binary.

Hardware design teams at leading semiconductor firms evaluate these exact port contracts, race-condition assertions, and corner cases during technical design reviews and ASIC engineer interviews.

Concept: Unlike binary-to-Gray, this direction is a ripple of XORs, not a single expression: bin[3]=gray[3], then each lower bit is the XOR of the previous binary bit with the matching gray bit — bin[i] = bin[i+1] ^ gray[i], computed from the top bit down.

Port List & Interface Timing

The hidden testbench instantiates top_module. Module port names and bit-widths must match the interface contract exactly:

NameDirWidthDescription
grayinput4Gray-coded value
binoutput4Standard binary equivalent

Timing Constraints & Synthesizable RTL Rules

⚡ Synthesizable Implementation Guidelines

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

Synthesis Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Starter RTL Code

module top_module(
  input  [3:0] gray,
  output [3:0] bin
);

  // Your code here — bin[3]=gray[3], then ripple down: bin[i] = bin[i+1] ^ gray[i].

endmodule
Advertisement

Related RTL Problems in Level 2

Frequently Asked Questions

What does Gray to Binary Code Converter require?

Reverse the conversion: turn a 4-bit Gray code value back into standard binary. Implement it as Verilog module top_module matching the listed ports.

Is this design combinational or sequential?

Tags: combinational, code-converter. If a clock signal is present in the port table, implement it as sequential logic; otherwise, use continuous assignments or combinational blocks.

How is my solution graded?

A hidden SystemVerilog testbench simulates your module in the cloud judge. You pass when all directed corner cases match the golden model and the VCD timing waveform matches the contract.

How does this challenge help with semiconductor interviews?

Technical interviewers at NVIDIA, Qualcomm, Apple, and Intel routinely ask candidates to code, debug, and explain the timing waveforms of Gray to Binary Code Converter to assess real-world synthesizability and race-condition awareness.

Advertisement