Part of Curriculum: Memory and FIFO Design (Module 1: Sequential Design)
View Full Roadmap →
Level 4 Medium 25 pts ✓ Solved

Alarm Clock Trigger

Sequential Design · sequential, comparator

Fire an alarm for exactly one cycle the moment the current time matches the alarm time — not for the entire minute the clock happens to sit on that value.

Write a synthesizable Verilog module named top_module matching the ports below exactly.
📐 Circuit Schematic Diagram
cur_hour[4:0]cur_min[5:0]alarm_hour[4:0]alarm_min[5:0]alarm_trig>clkrst_nALARM CLOCK TRIGGERDIGITAL HARDWARE BLOCK
⚡ Timing & Synthesizability Constraints

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

RTL Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Concept: Compute match combinationally, then register both it and its own previous cycle's value: alarm_trig <= match && !prev_match;. That's a rising-edge detector on the match condition — without it, the alarm would blare continuously for every cycle the clock happens to sit on the matching minute, not just the moment it arrives.
NameDirWidthDescription
clkinput1Clock
rstinput1Sync active-high reset
cur_hourinput5Current hour, 0-23
cur_mininput6Current minute, 0-59
alarm_hourinput5Alarm hour
alarm_mininput6Alarm minute
alarm_eninput1Alarm enabled
alarm_trigoutput1Pulses high for 1 cycle when time first matches
Expected Waveform (Golden Timing Contract)
Verilog-2001 / SV Saved
Font: |
// Click Run Tests (or press Ctrl+Enter) to compile your RTL and simulate against hidden testbenches.
Simulation Timing Diagram (VCD Waveform)
100%
No simulation waveform yet. Run tests to simulate and generate VCD traces.
No compilation run yet. Syntax warnings and elaboration messages will appear here.
No simulation output yet. Raw stdout from vvp will appear here.

RTL Problems / Level 4 · Sequential Design

What You Will Learn

By solving Alarm Clock Trigger, you will acquire core industry skills:

  • Synthesizable hardware modeling in standard Verilog-2001 / SystemVerilog.
  • Correct handling of interface port contracts, edge-triggered clocks, and active-low/high resets.
  • Simulation waveform interpretation and debugging using timing diagrams (VCD traces).
  • Architectural avoidance of timing violations, glitching hazards, and synthesis warnings.

Problem Statement & Requirements

Fire an alarm for exactly one cycle the moment the current time matches the alarm time — not for the entire minute the clock happens to sit on that value.

Hardware design teams at leading semiconductor firms evaluate these exact port contracts, race-condition assertions, and corner cases during technical design reviews and ASIC engineer interviews.

Concept: Compute match combinationally, then register both it and its own previous cycle's value: alarm_trig <= match && !prev_match;. That's a rising-edge detector on the match condition — without it, the alarm would blare continuously for every cycle the clock happens to sit on the matching minute, not just the moment it arrives.

Port List & Interface Timing

The hidden testbench instantiates top_module. Module port names and bit-widths must match the interface contract exactly:

NameDirWidthDescription
clkinput1Clock
rstinput1Sync active-high reset
cur_hourinput5Current hour, 0-23
cur_mininput6Current minute, 0-59
alarm_hourinput5Alarm hour
alarm_mininput6Alarm minute
alarm_eninput1Alarm enabled
alarm_trigoutput1Pulses high for 1 cycle when time first matches

Timing Constraints & Synthesizable RTL Rules

⚡ Synthesizable Implementation Guidelines

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

Synthesis Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Starter RTL Code

module top_module(
  input      clk,
  input      rst,
  input      [4:0] cur_hour,
  input      [5:0] cur_min,
  input      [4:0] alarm_hour,
  input      [5:0] alarm_min,
  input      alarm_en,
  output reg alarm_trig
);

  // Your code here — register a "match" signal and pulse alarm_trig only on its rising edge.

endmodule
Advertisement

Related RTL Problems in Level 4

Frequently Asked Questions

What does Alarm Clock Trigger require?

Fire an alarm for exactly one cycle the moment the current time matches the alarm time — not for the entire minute the clock happens to sit on that value. Implement it as Verilog module top_module matching the listed ports.

Is this design combinational or sequential?

Tags: sequential, comparator. If a clock signal is present in the port table, implement it as sequential logic; otherwise, use continuous assignments or combinational blocks.

How is my solution graded?

A hidden SystemVerilog testbench simulates your module in the cloud judge. You pass when all directed corner cases match the golden model and the VCD timing waveform matches the contract.

How does this challenge help with semiconductor interviews?

Technical interviewers at NVIDIA, Qualcomm, Apple, and Intel routinely ask candidates to code, debug, and explain the timing waveforms of Alarm Clock Trigger to assess real-world synthesizability and race-condition awareness.

Advertisement