RTL Problems / Level 2 · Combinational Design
What You Will Learn
By solving Two's-Complement Negator, you will acquire core industry skills:
- Synthesizable hardware modeling in standard Verilog-2001 / SystemVerilog.
- Correct handling of interface port contracts, edge-triggered clocks, and active-low/high resets.
- Simulation waveform interpretation and debugging using timing diagrams (VCD traces).
- Architectural avoidance of timing violations, glitching hazards, and synthesis warnings.
Problem Statement & Requirements
Negate a signed 4-bit number and correctly flag the one input value that cannot be negated.
Hardware design teams at leading semiconductor firms evaluate these exact port contracts, race-condition assertions, and corner cases during technical design reviews and ASIC engineer interviews.
out = ~in + 1. But the most negative value, 4'b1000 (-8), has no positive counterpart in 4 bits — negating it overflows back to itself, so overflow = (in == 4'b1000) flags exactly that case.Port List & Interface Timing
The hidden testbench instantiates top_module. Module port names and bit-widths must match the interface contract exactly:
| Name | Dir | Width | Description |
|---|---|---|---|
| in | input | 4 | Signed two's-complement input |
| out | output | 4 | Negated value, -in |
| overflow | output | 1 | 1 when in = -8 (cannot be negated in 4 bits) |
Timing Constraints & Synthesizable RTL Rules
Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.
Synthesis Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.
Starter RTL Code
module top_module(
input [3:0] in,
output [3:0] out,
output overflow
);
// Your code here — out = -in (invert and add 1); overflow when in cannot be negated.
endmodule
Related RTL Problems in Level 2
- D Flip-Flop — Positive-Edge-Triggered Storage — Implement a basic 1-bit positive-edge-triggered D flip-flop without reset.
- D Flip-Flop with Asynchronous Reset — Reset Behavior — Design a D flip-flop with active-low asynchronous reset (areset_n). Reset forces q to 0 immediately, independent of clk.
- D Flip-Flop with Synchronous Reset — Clocked Reset — Implement a D flip-flop with active-high synchronous reset (sync_rst). The reset takes effect only on the rising clock edge.
Connected EcrioniX Learning Resources
Accelerate your VLSI engineering knowledge with these curated learning materials:
Progress through step-by-step verified modules from fundamentals to advanced silicon design.
Benchmark your hardware knowledge across 10 semiconductor domains and receive study roadmaps.
Explore foundational circuit theory, waveform timing, and physical hardware implementation.
Frequently Asked Questions
What does Two's-Complement Negator require?
Negate a signed 4-bit number and correctly flag the one input value that cannot be negated. Implement it as Verilog module top_module matching the listed ports.
Is this design combinational or sequential?
Tags: combinational, arithmetic. If a clock signal is present in the port table, implement it as sequential logic; otherwise, use continuous assignments or combinational blocks.
How is my solution graded?
A hidden SystemVerilog testbench simulates your module in the cloud judge. You pass when all directed corner cases match the golden model and the VCD timing waveform matches the contract.
How does this challenge help with semiconductor interviews?
Technical interviewers at NVIDIA, Qualcomm, Apple, and Intel routinely ask candidates to code, debug, and explain the timing waveforms of Two's-Complement Negator to assess real-world synthesizability and race-condition awareness.