Part of Curriculum: Sequential RTL Design (Module 1: Sequential Design)
View Full Roadmap →
Level 3 Medium 25 pts ✓ Solved

BCD Stopwatch (00-59 Seconds)

Sequential Design · sequential, counter

Two chained BCD digits counting seconds from 00 to 59 and wrapping — the real digit-chaining pattern behind every digital clock and stopwatch display.

Write a synthesizable Verilog module named top_module matching the ports below exactly.
📐 Circuit Schematic Diagram
enunits[3:0]tens[2:0]>clkrst_nBCD STOPWATCHSEQUENTIAL COUNTER
⚡ Timing & Synthesizability Constraints

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

RTL Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Concept: The units digit counts 0-9 and rolls over into a tens-digit increment. The tens digit, though, must wrap at 5, not 9 — a plain BCD digit maxes at 9, but a seconds display's tens place is only ever 0-5. Using the generic BCD wraparound here would let the display show impossible times like "68".
NameDirWidthDescription
clkinput1Clock
rstinput1Sync active-high reset
eninput1Count enable (tick once per second in real use)
unitsoutput4Ones digit, 0-9
tensoutput3Tens digit, 0-5
Expected Waveform (Golden Timing Contract)
Verilog-2001 / SV Saved
Font: |
// Click Run Tests (or press Ctrl+Enter) to compile your RTL and simulate against hidden testbenches.
Simulation Timing Diagram (VCD Waveform)
100%
No simulation waveform yet. Run tests to simulate and generate VCD traces.
No compilation run yet. Syntax warnings and elaboration messages will appear here.
No simulation output yet. Raw stdout from vvp will appear here.

RTL Problems / Level 3 · Sequential Design

What You Will Learn

By solving BCD Stopwatch (00-59 Seconds), you will acquire core industry skills:

  • Synthesizable hardware modeling in standard Verilog-2001 / SystemVerilog.
  • Correct handling of interface port contracts, edge-triggered clocks, and active-low/high resets.
  • Simulation waveform interpretation and debugging using timing diagrams (VCD traces).
  • Architectural avoidance of timing violations, glitching hazards, and synthesis warnings.

Problem Statement & Requirements

Two chained BCD digits counting seconds from 00 to 59 and wrapping — the real digit-chaining pattern behind every digital clock and stopwatch display.

Hardware design teams at leading semiconductor firms evaluate these exact port contracts, race-condition assertions, and corner cases during technical design reviews and ASIC engineer interviews.

Concept: The units digit counts 0-9 and rolls over into a tens-digit increment. The tens digit, though, must wrap at 5, not 9 — a plain BCD digit maxes at 9, but a seconds display's tens place is only ever 0-5. Using the generic BCD wraparound here would let the display show impossible times like "68".

Port List & Interface Timing

The hidden testbench instantiates top_module. Module port names and bit-widths must match the interface contract exactly:

NameDirWidthDescription
clkinput1Clock
rstinput1Sync active-high reset
eninput1Count enable (tick once per second in real use)
unitsoutput4Ones digit, 0-9
tensoutput3Tens digit, 0-5

Timing Constraints & Synthesizable RTL Rules

⚡ Synthesizable Implementation Guidelines

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

Synthesis Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Starter RTL Code

module top_module(
  input            clk,
  input            rst,
  input            en,
  output reg [3:0] units,
  output reg [2:0] tens
);

  // Your code here — units wraps at 9, tens wraps at 5.

endmodule
Advertisement

Related RTL Problems in Level 3

Frequently Asked Questions

What does BCD Stopwatch (00-59 Seconds) require?

Two chained BCD digits counting seconds from 00 to 59 and wrapping — the real digit-chaining pattern behind every digital clock and stopwatch display. Implement it as Verilog module top_module matching the listed ports.

Is this design combinational or sequential?

Tags: sequential, counter. If a clock signal is present in the port table, implement it as sequential logic; otherwise, use continuous assignments or combinational blocks.

How is my solution graded?

A hidden SystemVerilog testbench simulates your module in the cloud judge. You pass when all directed corner cases match the golden model and the VCD timing waveform matches the contract.

How does this challenge help with semiconductor interviews?

Technical interviewers at NVIDIA, Qualcomm, Apple, and Intel routinely ask candidates to code, debug, and explain the timing waveforms of BCD Stopwatch (00-59 Seconds) to assess real-world synthesizability and race-condition awareness.

Advertisement