Part of Curriculum: Sequential RTL Design (Module 1: Sequential Design)
View Full Roadmap →
Level 3 Medium 25 pts ✓ Solved

BCD Up/Down Counter

Sequential Design · sequential, counter

A single-digit BCD counter that wraps at 9 going up and at 0 going down — not at the binary limits of a 4-bit register.

Write a synthesizable Verilog module named top_module matching the ports below exactly.
📐 Circuit Schematic Diagram
enup_downq[3:0]>clkrst_nBCD UP/DOWN COUNTERSEQUENTIAL COUNTER
⚡ Timing & Synthesizability Constraints

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

RTL Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Concept: A plain 4-bit counter wraps at 15/0, but a BCD digit is only ever 0-9. Counting up must jump straight from 9 back to 0 (q==4'd9 ? 4'd0 : q+1), and counting down must jump from 0 straight to 9 (q==4'd0 ? 4'd9 : q-1) — letting it wrap at the binary boundary instead produces an invalid BCD digit like 10-15.
NameDirWidthDescription
clkinput1Clock
rstinput1Sync active-high reset (q=0)
eninput1Count enable
up_downinput11=count up, 0=count down
qoutput4Current BCD digit, 0-9
Expected Waveform (Golden Timing Contract)
Verilog-2001 / SV Saved
Font: |
// Click Run Tests (or press Ctrl+Enter) to compile your RTL and simulate against hidden testbenches.
Simulation Timing Diagram (VCD Waveform)
100%
No simulation waveform yet. Run tests to simulate and generate VCD traces.
No compilation run yet. Syntax warnings and elaboration messages will appear here.
No simulation output yet. Raw stdout from vvp will appear here.

RTL Problems / Level 3 · Sequential Design

What You Will Learn

By solving BCD Up/Down Counter, you will acquire core industry skills:

  • Synthesizable hardware modeling in standard Verilog-2001 / SystemVerilog.
  • Correct handling of interface port contracts, edge-triggered clocks, and active-low/high resets.
  • Simulation waveform interpretation and debugging using timing diagrams (VCD traces).
  • Architectural avoidance of timing violations, glitching hazards, and synthesis warnings.

Problem Statement & Requirements

A single-digit BCD counter that wraps at 9 going up and at 0 going down — not at the binary limits of a 4-bit register.

Hardware design teams at leading semiconductor firms evaluate these exact port contracts, race-condition assertions, and corner cases during technical design reviews and ASIC engineer interviews.

Concept: A plain 4-bit counter wraps at 15/0, but a BCD digit is only ever 0-9. Counting up must jump straight from 9 back to 0 (q==4'd9 ? 4'd0 : q+1), and counting down must jump from 0 straight to 9 (q==4'd0 ? 4'd9 : q-1) — letting it wrap at the binary boundary instead produces an invalid BCD digit like 10-15.

Port List & Interface Timing

The hidden testbench instantiates top_module. Module port names and bit-widths must match the interface contract exactly:

NameDirWidthDescription
clkinput1Clock
rstinput1Sync active-high reset (q=0)
eninput1Count enable
up_downinput11=count up, 0=count down
qoutput4Current BCD digit, 0-9

Timing Constraints & Synthesizable RTL Rules

⚡ Synthesizable Implementation Guidelines

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

Synthesis Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Starter RTL Code

module top_module(
  input  clk,
  input  rst,
  input  en,
  input  up_down,
  output reg [3:0] q
);

  // Your code here — count 0..9 up, or 9..0 down, wrapping at the BCD boundary (not 15).

endmodule
Advertisement

Related RTL Problems in Level 3

Frequently Asked Questions

What does BCD Up/Down Counter require?

A single-digit BCD counter that wraps at 9 going up and at 0 going down — not at the binary limits of a 4-bit register. Implement it as Verilog module top_module matching the listed ports.

Is this design combinational or sequential?

Tags: sequential, counter. If a clock signal is present in the port table, implement it as sequential logic; otherwise, use continuous assignments or combinational blocks.

How is my solution graded?

A hidden SystemVerilog testbench simulates your module in the cloud judge. You pass when all directed corner cases match the golden model and the VCD timing waveform matches the contract.

How does this challenge help with semiconductor interviews?

Technical interviewers at NVIDIA, Qualcomm, Apple, and Intel routinely ask candidates to code, debug, and explain the timing waveforms of BCD Up/Down Counter to assess real-world synthesizability and race-condition awareness.

Advertisement