Part of Curriculum: Sequential RTL Design (Module 1: Sequential Design)
View Full Roadmap →
Level 3 Medium 25 pts ✓ Solved

4-Bit Saturating Up/Down Counter

Sequential Design · sequential, counter

A counter that clamps at its limits instead of wrapping — pushing further up at 15 or further down at 0 simply has no effect.

Write a synthesizable Verilog module named top_module matching the ports below exactly.
📐 Circuit Schematic Diagram
enup_downq[3:0]>clkrst_n4-BIT SATURATING UP/SEQUENTIAL COUNTER
⚡ Timing & Synthesizability Constraints

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

RTL Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Concept: Guard each direction with a boundary check before incrementing: q <= (q==15) ? q : q+1; for up, and the mirror check for down. Saturation arithmetic like this shows up constantly in DSP and control logic where wraparound would be a real bug (a volume level "counter" should not wrap from max back to 0).
NameDirWidthDescription
clkinput1Clock
rstinput1Sync active-high reset
eninput1Count enable
up_downinput11 = count up, 0 = count down
qoutput4Counter value, clamped to 0-15
Expected Waveform (Golden Timing Contract)
Verilog-2001 / SV Saved
Font: |
// Click Run Tests (or press Ctrl+Enter) to compile your RTL and simulate against hidden testbenches.
Simulation Timing Diagram (VCD Waveform)
100%
No simulation waveform yet. Run tests to simulate and generate VCD traces.
No compilation run yet. Syntax warnings and elaboration messages will appear here.
No simulation output yet. Raw stdout from vvp will appear here.

RTL Problems / Level 3 · Sequential Design

What You Will Learn

By solving 4-Bit Saturating Up/Down Counter, you will acquire core industry skills:

  • Synthesizable hardware modeling in standard Verilog-2001 / SystemVerilog.
  • Correct handling of interface port contracts, edge-triggered clocks, and active-low/high resets.
  • Simulation waveform interpretation and debugging using timing diagrams (VCD traces).
  • Architectural avoidance of timing violations, glitching hazards, and synthesis warnings.

Problem Statement & Requirements

A counter that clamps at its limits instead of wrapping — pushing further up at 15 or further down at 0 simply has no effect.

Hardware design teams at leading semiconductor firms evaluate these exact port contracts, race-condition assertions, and corner cases during technical design reviews and ASIC engineer interviews.

Concept: Guard each direction with a boundary check before incrementing: q <= (q==15) ? q : q+1; for up, and the mirror check for down. Saturation arithmetic like this shows up constantly in DSP and control logic where wraparound would be a real bug (a volume level "counter" should not wrap from max back to 0).

Port List & Interface Timing

The hidden testbench instantiates top_module. Module port names and bit-widths must match the interface contract exactly:

NameDirWidthDescription
clkinput1Clock
rstinput1Sync active-high reset
eninput1Count enable
up_downinput11 = count up, 0 = count down
qoutput4Counter value, clamped to 0-15

Timing Constraints & Synthesizable RTL Rules

⚡ Synthesizable Implementation Guidelines

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

Synthesis Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Starter RTL Code

module top_module(
  input            clk,
  input            rst,
  input            en,
  input            up_down,
  output reg [3:0] q
);

  // Your code here — clamp at 15 going up, clamp at 0 going down.

endmodule
Advertisement

Related RTL Problems in Level 3

Frequently Asked Questions

What does 4-Bit Saturating Up/Down Counter require?

A counter that clamps at its limits instead of wrapping — pushing further up at 15 or further down at 0 simply has no effect. Implement it as Verilog module top_module matching the listed ports.

Is this design combinational or sequential?

Tags: sequential, counter. If a clock signal is present in the port table, implement it as sequential logic; otherwise, use continuous assignments or combinational blocks.

How is my solution graded?

A hidden SystemVerilog testbench simulates your module in the cloud judge. You pass when all directed corner cases match the golden model and the VCD timing waveform matches the contract.

How does this challenge help with semiconductor interviews?

Technical interviewers at NVIDIA, Qualcomm, Apple, and Intel routinely ask candidates to code, debug, and explain the timing waveforms of 4-Bit Saturating Up/Down Counter to assess real-world synthesizability and race-condition awareness.

Advertisement