Part of Curriculum: CDC, RDC and Low-Power RTL (Module 1: Sequential Design)
View Full Roadmap →
Level 7 Medium 25 pts ✓ Solved

Synchronized-Enable Counter Snapshot

Sequential Design · sequential, cdc

Snapshot a free-running counter's value only when an asynchronous sample request has been safely synchronized — synchronizing the control signal, not the fast-changing data, is the trick.

Write a synthesizable Verilog module named top_module matching the ports below exactly.
📐 Circuit Schematic Diagram
sample_ensnapshot[7:0]>clkrst_nSYNCHRONIZED-ENABLE SEQUENTIAL COUNTER
⚡ Timing & Synthesizability Constraints

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

RTL Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Concept: The right CDC pattern here is to synchronize the slow-changing control signal (sample_en) rather than trying to synchronize the free-running counter itself, which changes every cycle. Once sample_en is safely double-flopped and edge-detected, use that clean local pulse to gate a normal capture register. Gating the capture directly off the raw, unsynchronized sample_en input instead risks capturing the counter mid-transition or re-triggering unpredictably.
NameDirWidthDescription
clkinput1Local clock
rstinput1Sync active-high reset
sample_eninput1Asynchronous sample-request level
snapshotoutput8Free-running counter value, captured once per synchronized sample_en edge
Expected Waveform (Golden Timing Contract)
Verilog-2001 / SV Saved
Font: |
// Click Run Tests (or press Ctrl+Enter) to compile your RTL and simulate against hidden testbenches.
Simulation Timing Diagram (VCD Waveform)
100%
No simulation waveform yet. Run tests to simulate and generate VCD traces.
No compilation run yet. Syntax warnings and elaboration messages will appear here.
No simulation output yet. Raw stdout from vvp will appear here.

RTL Problems / Level 7 · Sequential Design

What You Will Learn

By solving Synchronized-Enable Counter Snapshot, you will acquire core industry skills:

  • Synthesizable hardware modeling in standard Verilog-2001 / SystemVerilog.
  • Correct handling of interface port contracts, edge-triggered clocks, and active-low/high resets.
  • Simulation waveform interpretation and debugging using timing diagrams (VCD traces).
  • Architectural avoidance of timing violations, glitching hazards, and synthesis warnings.

Problem Statement & Requirements

Snapshot a free-running counter's value only when an asynchronous sample request has been safely synchronized — synchronizing the control signal, not the fast-changing data, is the trick.

Hardware design teams at leading semiconductor firms evaluate these exact port contracts, race-condition assertions, and corner cases during technical design reviews and ASIC engineer interviews.

Concept: The right CDC pattern here is to synchronize the slow-changing control signal (sample_en) rather than trying to synchronize the free-running counter itself, which changes every cycle. Once sample_en is safely double-flopped and edge-detected, use that clean local pulse to gate a normal capture register. Gating the capture directly off the raw, unsynchronized sample_en input instead risks capturing the counter mid-transition or re-triggering unpredictably.

Port List & Interface Timing

The hidden testbench instantiates top_module. Module port names and bit-widths must match the interface contract exactly:

NameDirWidthDescription
clkinput1Local clock
rstinput1Sync active-high reset
sample_eninput1Asynchronous sample-request level
snapshotoutput8Free-running counter value, captured once per synchronized sample_en edge

Timing Constraints & Synthesizable RTL Rules

⚡ Synthesizable Implementation Guidelines

Timing Contract: Strict synchronous timing aligned to posedge clk or zero-delay combinational propagation.

Synthesis Constraints: Synthesizable Verilog-2001. No # delays in synthesizable RTL.

Starter RTL Code

module top_module(
  input  clk,
  input  rst,
  input  sample_en,
  output reg [7:0] snapshot
);

  // Your code here — free-run an 8-bit counter; 2-flop sync + edge-detect sample_en; capture the counter on that pulse.

endmodule
Advertisement

Related RTL Problems in Level 7

  • Async-Assert / Sync-Deassert Reset — Assert reset the instant it goes active, but only release it once it has been clean for 2 clock edges — the standard reset architecture for any real design.
  • 3-Flop CDC Synchronizer — A deeper 3-stage synchronizer for signals that need extra MTBF margin beyond the standard 2-flop chain.
  • Synchronized Rising-Edge Detector — Safely synchronize an asynchronous level signal, then produce a clean single-cycle pulse the moment it rises in the local clock domain.

Frequently Asked Questions

What does Synchronized-Enable Counter Snapshot require?

Snapshot a free-running counter's value only when an asynchronous sample request has been safely synchronized — synchronizing the control signal, not the fast-changing data, is the trick. Implement it as Verilog module top_module matching the listed ports.

Is this design combinational or sequential?

Tags: sequential, cdc. If a clock signal is present in the port table, implement it as sequential logic; otherwise, use continuous assignments or combinational blocks.

How is my solution graded?

A hidden SystemVerilog testbench simulates your module in the cloud judge. You pass when all directed corner cases match the golden model and the VCD timing waveform matches the contract.

How does this challenge help with semiconductor interviews?

Technical interviewers at NVIDIA, Qualcomm, Apple, and Intel routinely ask candidates to code, debug, and explain the timing waveforms of Synchronized-Enable Counter Snapshot to assess real-world synthesizability and race-condition awareness.

Advertisement